Payment & Shipping Terms:
If we cannot confirm a payment within 3 days nor get any message, we might report the buyer and cancel the deal.
If you are planning to be in the situation with no internet, please let us know.
Product Name: Motion Controller
Number of control axes: 16 more axes.
Servo amplifier connection method: SSCNETM/H (1 system).
Motion controller refers to a CPU module used in combination with a programmable controller CPU for motion control.
Use the Motion SFC program to independently control the programmable controller CPU.
Motion control that can share the load with the programmable controller CPU.
Implement motion control such as position tracking and serial operation.
You can directly manage input and output modules, analog quantity modules, high-speed counter modules, etc. to achieve high-speed input and output.
Serial ABS synchronous encoder input can be used with 2 units per module.
Position detection method: Paired value (ABS) method.
Transmission method: serial communication.
Allow tracking of target input points: 2 points.
Automatically transfer record files to an FTP server
Simply set it up through the recording configuration tool,
The data record files stored on the SD memory card can be sent to the FTP server Mitsubishi Q172DSCPU
Due to the ability of the record server to process multiple files, it can reduce management and maintenance tasks Q172DSCPU
Able to respond quickly when a malfunction occurs.
Simply extract data related to the problem, without spending time filtering a large amount of diagnostic data,
Therefore, it is possible to quickly determine the cause of the malfunction and develop a solution. Input number of points: 32.
Input voltage and current: DC24V6mA Mitsubishi Q172DSCPU.
Management time: 1/5/10/20/70ms.
32 points/1 common terminal.
37 pin D-sub connector.
Continuously climb the Q series.
Strengthen safety functions.
A file password of 32 characters can be set.
In addition to English letters and numbers, special characters can also be used,
Further enhanced password security.
In addition, only pre registered devices are allowed to access the CPU
Thus, unauthorized users' access to Mitsubishi Q172DSCPU was intercepted.
Therefore, it can prevent the outflow of important program assets and protect intellectual property rights.
Easily connect programming tools through Ethernet.
When programming tools (GX Works2, GX Developer) are directly connected to the CPU (1 on 1),
No IP address setting is required. And there is no need to choose cables, both straight and cross wires can be used.
Therefore, this connection method, like using USB, allows for easy communication with the CPU,
Even operators unfamiliar with network settings can easily establish connections to Mitsubishi motion controllers.
Various modules with excellent performance,
Meet various control requirements from analog quantity to positioning.
The Q series module products include a wide variety of I/O, analog, and positioning function modules.
It can meet the input and output requirements of switches, sensors, etc., as well as the control of temperature, weight, flow rate, and motors and drivers,
As well as the control requirements of various industries and fields, such as the positioning of control requirements, Mitsubishi motion controllers.
It can also be combined with CPU modules to achieve appropriate control. Measurement items: leakage current (l0), resistive leakage current (lor).
Number of measuring circuits: 2 circuits.
The edge monitoring module for measuring leakage current is the Mitsubishi motion controller.
Leakage current can be measured to ensure safety. By monitoring leakage current (l0), electric shock hazards can be detected.
Can continuously monitor the edge state of the equipment and measure resistive leakage current (LOR),
In order to continuously monitor the aging status of the equipment.
Each measurement item can be reported and monitored in two stages, including leakage current (lo) and resistive leakage current (lor),
No ladder program Q172DSCPU required. The alarm is divided into two stages: attention alarm and danger alarm.
One module can measure two circuits, and one module can measure two circuits of the same phase line power supply in the same system. Mitsubishi
In addition, GXWorks2 (version 1.90U or higher) can be used to easily set parameters.
[Measurement item] Leakage current (l0), resistive leakage current (lor)
Our advantage Products:
【Yaskawa】Servo Drive / Servo Motor
【Mitsubishi】Servo Drive / Servo Motor
【Honeywell】Module DCS / PLC
【Emerson】DeltaV Module / Servo Motor
【ABB】Input Output Module
【AB】Module / Touch Screen
【Rosemount】Pressure and Temperature Transmitter
【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive
Linture Technology Co,. Ltd
Contact person: Vivian
Tag:electric servo drive,
ac servo drive,
ac servo pack
Contact Person: Miss. Iris