Sales & Support
Request A Quote - Email
Payment & Shipping Terms:
|Type:||Servo Driver Servopack||Output Power:||400W|
|Phase:||Three-phase||Product Name:||Mitsubishi AC PLC Servo Driver|
|Rated Voltage:||AC200-230V||Speed Response Frequency:||50/60hz|
2.8A Industrial Servo Drives,
3PH Industrial Servo Drives,
Cable length: 0.5M.
Amplifier CC Link interface unit cable.
Used for MR-J2S-11KA (4) to MR-J2S-22KA (4).
Use a 0.5m (1.64ft) or shorter cable between the amplifier and the CC Link interface unit. Driver: MR - H_ ACN series CC-LINK function. Rated output: 15KW.
This test system consists of two parts, namely, the servo driver under test, the motor system and the upper computer MR-C40A, which send the speed command signal to the servo driver
The servo driver starts to run Mitsubishi servo instructions according to the instructions.
During the operation, the upper computer and the data acquisition circuit collect the operation data of the same server system,
The data is saved, analyzed and displayed. Because the motor in this test system is not loaded, the system volume is relatively small compared with the previous two test systems, and the system's corona measurement and control circuit are relatively simple
However, this also makes it impossible for the system to simulate the actual operation of the servo driver.
Generally, this kind of test system is only used to test the rotational speed and angular displacement of the tested system under no-load condition, and cannot conduct a comprehensive and accurate test on the servo driver. 1-axis servo amplifier. Mitsubishi general AC servo amplifier MELSERVO-J4 series. Rated output: 0.2kw. Interface: SSCNET Ⅲ/H
Power supply: three-phase AC200V or single-phase AC200V power supply MR-C40A single-phase AC200V is limited to servo amplifiers below 0.75kW. Servo amplifier supporting SSCNET Ⅲ/H
A fully synchronous system using high-speed serial optical communication can be built.
It can be combined with the servo system controller to maximize the functional performance of the servo system. MELSERVO-J4 weight-loss debut
The future star of servo market. World class servo products.
What should the new generation of MELSERVO be? The answer to this question is already floating
The outlet MR-C40A, MELSERVO-J4... represent another evolution on the basis of original high performance after full digitalization. It is also the latest masterpiece of MELSERVO, which fully meets the human and environmental requirements.
For example, the MR-C40A is designed according to the safety specifications and "Easy to Use" requirements for human use safety and environmental protection. It meets the energy saving performance required by the environmental protection era.
The evolution beyond performance MELSERVO-J4 makes a stunning debut! Mitsubishi motor universal AC servo amplifier MELSERVO-J3 series rated output: 3.5kw.
Interface type: SSCNETI optical fiber communication type. Power specification: three-phase AC400V
A fully synchronous control system can be built by using the high-speed serial communication between the motion controller and the servo amplifier up to 0.44ms
The SSCNET dish network can be formed by inserting a special optical fiber into the connector, which greatly reduces the wiring work and the possibility of wrong wiring.
Due to the use of optical fiber communication, the anti noise capability is greatly improved and long-distance cabling up to 800 meters (50 meters x 16 axes at most between stations) can be realized. Provide the servo amplifier MR-J3-B-RJ006 meeting the full closed loop control function. Servo optimization adjustment for machinery
More advanced optimization adjustment function and control function to maximize mechanical performance. Power: 75kw. Voltage: 200V.
Sine wave filter is used.
The voltage and current of the motor can be roughly adjusted to sine wave three ginger servo driver. Install the sine wave filter to the inverter output
Applicable to frequency converters above FRRR-A820-03800 (75K) and FR-A840-02160 (75K). The operating characteristics of the sine wave filter are equivalent to the sine wave power drive and can provide the following benefits. Low noise.
No surge current
Reduce motor losses (standard motors).
Contact Person: Miss. Iris