• Makes the notch filter frequency automatically follow the machine resonance frequency.
• Suppression of "Judder" noise of the machine can be expected which is caused by variation of the machines or resonance frequency due to aging.
2-channel notch filters • 2-channel notch filters are equipped in the driver independent from adaptive filter. • You can set up both frequency and width for each of 2 filters, and set up frequency in unit of 1Hz. • Suppression of "Judder" noise of the machine which has multiple resonance points can be expected
Damping control • 2-channel damping filters are equipped in this driver. You can suppress vibration occurring at both starting and stopping in low stiffness machine, by manually setting up vibration frequency in 0.1Hz unit. • You can also switch the vibration frequency set by 2-channel with rotating direction or with an external input to correspond to the variation of vibration frequency caused by the machine position. • Easy setup with entry of only frequency and filter value. Improper setup values do not result in unstable operation
• Enables easy parameter setting/changing, control state monitoring, status/error log viewing, and parameter saving/loading. • Makes it easy to move a target position, set a positioning point and perform teaching. • Can select and display 16 types of operation data including motor rotational speed and torque in the monitor mode