Yaskawa Electric Industrial Servo 50W 0.66A Motor SGMAS-A5A2A21 new in box
Power : 0.4KW
Options : Withiut Brake
AC Servo Motor
SGMAS Sigma II
Place of Origin
17-bit Incremental Encoder
Design Revision Order
Sharft End Specifition
Straight without key
OTHER SUPERIOR PRODUCTS
Yasakawa Motor, Driver SG-
Mitsubishi Motor HC-,HA-
Westinghouse Modules 1C-,5X-
GE Modules IC -
Fanuc motor A0-
Yokogawa transmitter EJA-
Auxiliary equipment and options
(a) The no-fuse breaker and magnetic contactor used should be the EN or IEC Standard-compliant products of the models described in Section 14.2.2.
(b) The sizes of the cables described in Section 14.2.2 meet the following requirements. To meet the other requirements, follow Table 5 and Appendix C in EN60204-1.
Ambient temperature: 40 (104) [ ( )]
Sheath: PVC (polyvinyl chloride)
Installed on wall surface or open table tray
(c) Use the EMC filter for noise reduction. The radio noise filter (FR-BIF) is not needed.
Using Noise Filters
Use an inhibit type noise filter to prevent noise from the power supply line. The following table lists recommended noise filters for each SERVOPACK model.
Install a noise filter on the power supply line for peripheral equipment as necessary.
Performing EMC tests
When EMC tests are run on a machine/device into which the servo amplifier has been installed, it must conform to the electromagnetic compatibility (immunity/emission) standards after it has satisfied the
operating environment/electrical equipment specifications.
For the way of dealing with the EMC Directive on servo amplifiers, refer to the "EMC INSTALLATION GUIDELINES(IB(NA)67310)".