SGMAH-A5AAAHC61 Yaskawa AC Servomotor driver Modular Have Interface

0.91A Ins B Yaskawa Servo Motor 400W 0.318 N.m Without Brake SGMAH 01A1A2B

QUICK DETAILS

OTHER SUPERIOR PRODUCTS

SIMILAR PRODUCTS

Unlike common instantaneous type fuses and breakers, overload devices are designed to allow high currents to flow briefly in the motor to allow for:
Typical motor starting currents of 6 to 8 times normal running current when starting.
Short duration overloads such as a slug of product going through a system.
If the motor inlets and outlets are covered by a blanket of lint or if a bearing should begin to lock, excessive heating of the motor windings will “overload” the motors insulation which could damage the motor.

The overcurrent device will not react to this low level overload. The motor overload device prevents this type of problem from severely damaging the motor and also provide protection for the circuit conductors since it is rated for the same or less current as the conductors.

• Overload protection trips when an overload exists for more than a short time. The time it takes for an overload to trip depends on the type of overload device, length of time the overload exists, and the ambient temperature in which the overloads are located.