SGMPH-08A1A-YR11 Yaskawa Straight Shaft Without Key Servomotor

Yaskawa AC Industrial Servo Motor SGMPH-08A1A-YR11 800W 200V BRAND NEW

SGMPH-08A1A-YR11 product features:

Servo motor sgmph type (speed: 3000r/).

Power: 1.5kw.

Power supply voltage: three-phase ac200v.

Serial encoder: 16 bit pair value.

Design sequence: Waterproof standard IP67.

Shaft end: straight shaft keyless sgmph-08a1a-yr11.

Option: no brake oil seal.

Flat series: when servo motor needs to be installed in a narrow space.

Flexible adaptation to user systems.

In order to build a good system for you, we will support you with a full range of products.

Products include single-phase 100V, single-phase 200V, three-phase 200V,

There are also sgmph-08a1a-yr11 motors with brake and reducer, which are applicable to the value code disc.

Furthermore, because of its compliance, it can be safely used in the range.

Smooth operation, with polar season speed observation and control,

The speed fluctuation of the motor is greatly reduced, and the motor can run smoothly at low speed.

Yaskawa sgmph-08a1a-yr11 parameter specification:

Servo motor sgmgh type.

Rated speed: 1500r/.

Power: 11kw.

Power supply voltage: three-phase ac200v.

Serial encoder: 17 bit pair sgmph-08a1a-yr11.

Design sequence: a.

Shaft end: straight shaft without key.

Option: with dc90v braking.

High speed feed series: occasions where high-speed operation is required without load.

The power supply of the main circuit and the control circuit are completely separated,

In case of alarm, only the power supply of the main circuit can be turned off, which is easy to maintain motor amps Yaskawa motor.

Built in parameter setter.

Parameters can be directly input by the servo driver body.

Save wiring.

Serial encoder is adopted, and the number of encoder wiring is reduced by 1/2 compared with the original product.

Multi in one control: use parameter switching to control motor amps Yaskawa motor with torque, position and speed.

Yaskawa sgmph-08a1a-yr11 performance introduction:

Σ- V series servo motor sgmgv type.

Rated output: 11kw.

Power supply voltage: ac200v.

Serial encoder: 20 bit incremental type (standard).

Design sequence: Standard various mechanical feed shaft drives use (high-speed feed) motor amps Yaskawa motor.

Complete varieties (300W ~ 15kw, with holding brake).

Equipped with high-resolution serial encoder (20 bits).

IP67 is adopted as the standard.

Example of use:

Machine tool.

Conveying machinery.

Handling machinery.

Food processing machinery acervomotor sgmgv-44adc61.

Rating and specification:

Rated time: continuous.

Vibration level: V15.

Edge resistance: DC500v, above 10m Ω.

Ambient temperature: 0 ~ 40 ° C.

Excitation mode: permanent magnet type.

Installation method: flange Yaskawa motor (Yaskawa).

Heat resistance grade: F.

Edge withstand voltage: ac1500v for 1 minute (200V level), ac1800v for 1 minute (400V level).

Protection mode: totally enclosed self cooling IP67 (except for the shaft through part).

Operating environment humidity: 20 ~ 880% (no condensation) Yaskawa motor.

Connection mode: direct connection.

Rotation direction: CCW rotation when viewed from the load side under the forward rotation command.

Sgmgv-1aada2b Yaskawa sgmgv-1aada2b design sequence: standard rotary servo motor rotary servo motor sgmgv-44a3c61

Medium inertia rotary servo motor sgmjv-08ada61

SGMAS-01ACAB1

Servo driver sgdv-120a05a for linear servo motor

Drive sgdm-1eada

Drive sgdm-10ada

Servo driver analog voltage, pulse sequence command type sgdv-120a01a002000

SGMJV-04A36C

SGMAH-04AAF41D

Medium inertia rotary servo motor sgmjv-01a3a61

Servo driver sgdv-180a25a for linear servo motor

Single axis servo driver sgd7s-200a10a002

Servo motor sgmph-01a1a2b

SGMMS-08ADC6S

Servo motor sgmgh-05aca61

Servo driver mechatrolink- Ⅱ communication command sgdv-r90a11b002000

SGMPS-15ACA21-E

Servo driver mechatrolink- Ⅱ communication command sgdv-r90f11a

Servo driver mechatrolink- Ⅱ communication command sgdv-7r6a11a

SGMJV-02ADL2C

We also can still offer these models as below: