RMP : 1500r/min Certification:CCC, CE, ROHS, UL, VDE Place of Origin:Japan Efficiency:IE 1
Note: 24VDC brakes for SGMGH Sigma II servomotors are standard. Contact a local source for 24VDC power supplies.
For technical information, request request Yaskawa manual number YEA-SIA-S800-32.2.
* For more detailed SGDH amplifier specifications and dimensions, refer to pages 99 to 112.
**2000rpm maximum for 11 and 15kW systems only.
“(A)” at the end of the cable number is the revision level. The revision level may be changed prior to this catalog’s reprinting.
** When ordering these cables for motors with brakes, order the standard power cable and the additional cable for the brake.
*** Standard cable lengths are Stock items; non-standard cable lengths are Limited Stock items.
**** 50 Pin Female D-Sub output connector mates to customer supplied third party terminal block. (e.g., Wago #289-449, Weidmuller
#919658, Phoenix #2283647, Amphenol/Sine #20-51039, and many others).
Minimum Recommended System Requirements Pentuim 200 MHz, 64MB RAM, 200MB hard drive, CDROM Drive, RS-232 or RS-422 port, Screen rsolution 800x600 w/ 256 colors, and Windows 95,98,NT4.0,2000,ME. (Windows XP planned)
These are general purpose regenerative units.
* Order the Motion document: PI#99004 for setup instructions for this unit. Caution: Proper set-up is necessary to avoid equipment damage