The procedure indicated here applies for Open Loop Vector (OLV) control (A1-02 = 2). For V/f control Auto- ning, only the parameters with a ― ‖will appear. For more detail, please refer to Quick Start Guide TOEPC71060614 Section 4.7, Auto uning.

Press once until the Digital Operator shows the Auto-Tuning menu (A.Tun) then press The display will show when the Auto-Tuning procedure has been successfully completed. Please reference the V1000 Quick Start Guide or repeat the Auto-Tuning procedure again if the display shows an error message. Motor HP to kW = HP x 0.746 Example: 10HP = 10 x 0.746 = 7.46 kW .

For standard AC motors use the default setting for motor base frequency (60Hz), motor poles (4) and motor rated speed.

Motor Rated Voltage (e.g. 230 V, 460 V)

Motor Rated current (e.g. 11.0 A, 22.0 A)

Motor Base Frequency (e.g. 60.0 Hz)

Motor Poles (e.g. 4 Poles)

Motor Rated Speed (e.g. 1750 rpm)