2000r /min of SGMDH-32A2A-YR51 , Feedback to DC bus，Power Supply Voltage

 

Type No. Signal Name Description Signal Level
Digital input signals
S1 Forward run/stop command Forward run when CLOSED; stopped when OPEN.
24 Vdc, 8 mA
Photocoupler isolation
S2 Reverse run/stop command Reverse run when CLOSED; stopped when OPEN.
S3 External fault input Fault when CLOSED.
Multi-function digital inputs
Functions set by H1-01 to H1-05.
S4 Fault reset Reset when CLOSED
S5 Multi-step speed reference 1
(Master/auxiliary switch)
Auxiliary frequency reference when CLOSED.
S6 Multi-step speed reference 2 Multi-step setting 2 when CLOSED.
S7 Jog frequency reference Jog frequency when CLOSED.
SN SC Digital input common Refer to Table 2.10 for connection details.
SP Analog input signals
+V +15Vdc power supply +15Vdc power supply for analog inputs or transmitters +15Vdc
(Max. current: 20 mA) A1 Analog input or Speed Command 0 to +10Vdc/100% 0 to +10 V(20 kΩ)
A2 Multi-function analog input 4 to 20 mA/100% 0 to +10Vdc/100% (H3-0
Function set by H3-09.
4 to 20 mA(250Ω)
0 to +10 V(20kΩ)
AC Analog common – –
E(G) Shield wire, optional ground
line connection point – –
Digital output signals M1
During Run (N.O. contact) CLOSED during operation
Multi-function digital output
Function set by
H2-01. Dry contacts
Contact capacity:
1 A max. at 250Vac
1 A max. at 30Vdc
Remote/Auto Operation
(N.O. contact) CLOSED when local control
Multi-function digital output
Function set by M4 H2-02.
Fault output signal (SPDT)
MA/MC: CLOSED during fault condition
MB/MC: OPEN during fault condition
Dry contacts
Contact capacity:
1 A max. at 250Vac
1 A max. at 30Vdc
Analog output signals
FM Multi-function analog output (output frequency)
0 to +10Vdc/100% frequency
Multi-function
analog monitor 1
Function set by H4-01
0 to +10Vdc max. ±5%
2 mA max. AC Analog common –
AM Multi-function analog output (output current) 0 to +10Vdc/100% Drive's rated
output current
Multi-function analog monitor 2
Function set by H4-04 RS-485/ 422 R+ Modbus communication input For 2-wire RS-485, jumper R+ and S+ and jumper R- and S-.
Differential input, R- PHC isolation S+ Modbus communication output
Differential input, S- PHC isolation