Industrial antomation prduct:

PLC,DCS,Sensor,Inverter,encoder,relay,Servo Drives,Soft,starter,touch,screen

Work hard and best service for you!

Sales & Support
Request A Quote - Email
Select Language
English
Home
Products
About Us
Factory Tour
Quality Control
Contact Us
Request A Quote
Home ProductsDigital I O Module

IC693CHS398J GE Slot Docking Station programmable digital module

IC693CHS398J GE Slot Docking Station programmable digital module

IC693CHS398J GE Slot Docking Station programmable digital module
IC693CHS398J GE Slot Docking Station programmable digital module IC693CHS398J GE Slot Docking Station programmable digital module IC693CHS398J GE Slot Docking Station programmable digital module IC693CHS398J GE Slot Docking Station programmable digital module

Large Image :  IC693CHS398J GE Slot Docking Station programmable digital module Get Best Price

Product Details:

Place of Origin: USA
Brand Name: GE Fanuc
Certification: CE
Model Number: IC693CHS398J

Payment & Shipping Terms:

Minimum Order Quantity: 1 pc
Price: contact us
Packaging Details: New in original box
Delivery Time: 3-5 work days
Payment Terms: L/C, T/T , Paypal
Supply Ability: 100
Detailed Product Description
Warranty: 12 Months Condition: 100% Original
Product Name: GE Slot Docking Station Type: Programmable Digital Module
Package: Original Package

Brand: GE Fanuc Model 1: IC693CHS398J
Model 2: IC695ACC400-AA Model 3: IC695PSD040
Model 4: IC695PBM300-BC Place Of Origin: USA
Model 5: IC695PBM300-CA Model 6: IC695PBM300-BB
High Light:

plc power supply module

,

diode redundancy module

 

 

Redundant Power Supply ModuleGE FanucIC693CHS398J RX3i ETHERNET NIU WITH WT0 SERIAL PORTS



Version 1.04 of the IC695PBM300 RX3i PROFIBUS Master resolves the following issues:

  • When multiple Lumberg devices (8in/4out) are connected to the bus and power is removed from these devices, but the PBM300 remains powered, the inputs assigned to the Lumberg devices will toggle between 1 and 0.
  • Configuring slaves with a large amount of parameter data returns the correct error code when parameter data exceeds the available memory space. The IC695PBM300 is field upgradable to firmware version 1.04 using the firmware upgrade utility.

Upgrade Kit: 44A753033-G02

The PACSystems* RX3i PROFIBUS Master Module, IC695PBM300, allows the host RX3i CPU
to send and receive data via a PROFIBUS-DP network.
The IC695PBM300 module provides the following PROFIBUS communications features:
 

Supports all standard data rates

  • Supports a maximum of 3,584 bytes of input data and 3,584 bytes of output data
  • Supports a maximum of 125 PROFIBUS-DP slaves
  • Supports a maximum of 244 bytes of input data and 244 bytes of output data for each
  • slave
  • Supports Sync and Freeze modes
  • Supports DP-V1 Read, Write and Alarm messages
  • Has PROFIBUS-compliant module and network status LEDs


The PROFIBUS Master module must be located in an RX3i Universal Backplane and requires a host RX3i CPU with firmware version 2.9 or later.
The PROFIBUS module receives its firmware upgrades indirectly via the host controller CPU using the WinLoader software utility. WinLoader is supplied with any updates to the
PROFIBUS module software.



 

 
Similar Products
IC660EBD020 Electronic Assembly for IC660BBD020
IC660EBD021 Electronic Assembly for IC660BBD021
IC660EBD024 Electronic Assembly for IC660BBD024
IC660EBD025 Electronic Assembly for IC660BBD025
IC660EBD101 Electronic Assembly for IC660BBD101
IC660EBD110 Electronic Assembly for IC660BBD110
IC660EBR100 Electronic Assembly for IC660BBR100
IC660EBR101 Electronic Assembly for IC660BBR101
IC660EBS102 Electronic Assembly for IC660BBS102
IC660EBS103 Electronic Assembly for IC660BBS103
IC660EBA021 Electronic Assembly for IC660BBA021
IC660EBA023 Electronic Assembly for IC660BBA023
IC660EBA101 Electronic Assembly for IC660BBA101
IC660EBA103 Electronic Assembly for IC660BBA103
IC660EBD120 Electronic Assembly for IC660BBD120
IC660HHM501 Hand-Held Monitor includes Cable and Battery Charger
IC660ELB906 PCIM (XT/AT Interface Board) & S/W Driver (IC641GBE647)
IC660ELB921 Single-slot PCIM (XT/AT Interface Board) 1-channel
 
 
 
 
Release Information
Version 1.04 of the IC695PBM300 RX3i PROFIBUS Master resolves the following issues:
  • When multiple Lumberg devices (8in/4out) are connected to the bus and power iremoved from these devices, but the PBM300 remains powered, the inputs assigned to the Lumberg devices will toggle between 1 and 0.
  • Configuring slaves with a large amount of parameter data returns the correct error code when parameter data exceeds the available memory space. The IC695PBM300 is field upgradable to firmware version 1.04 using the firmware upgrad utility.
Upgrade Kit: 44A753033-G02
 
 
 
Module Status Information
For details on using the Communication Request function to communicate with the PROFIBUS master module, refer tothe PACSystems RX3i PROFIBUS Modules User’s Manual, GFK-2301.
Slave Status Bit Array
The Slave Status bit array contains a bit for each slave. If communication with a slave has no errors, the bitcorresponding to the slave (determined by its network address) is set. If the communication has errors or is not occurring for any reason, the bit is cleared. The Master also maintains its own status in the bit corresponding to its network address.
Slave Diagnostics ID Array
If diagnostics are pending, the first word of this two-word array contains the station address of the first slave that has diagnostics. The diagnostics can be read using the Get Device Diagnostics COMMREQ (command 4). This clears the word and the master then places the next pending diagnostic address into the Slave Diagnostics word. If this word is zero there are no pending diagnostics.The second word of this array is reserved and set to 0.
DPV1 Alarm Status Array
The 32-bit DPV1 Alarm Status array is used at the beginning of a scan to receive the station address of a slave that has sent a DPV1 Alarm message. If another slave has sent a DPV1 alarm message, it is ignored until the first one has been
serviced, and will then appear in a subsequent scan. For details on the status format, refer to “DPV1 Alarm AcknowledgeCOMMREQ” in GFK-2301.
Slave Configured Bits
This 128-bit array indicates which slaves on the PROFIBUS network are configured. Each slave has a corresponding bit in this array. A slave's configuration status address equals Start Address + Station Address of the slave. For example, if the configuration status bits are mapped to %I00001, the status for the slave at Station Address 5 would be found at %I00001 + 5=%I00006.
Slave Diagnostic Bits
This 128-bit array indicates which slaves on the PROFIBUS network have diagnostic data available. The diagnostics can be read using the Get Device Diagnostics COMMREQ (command 4). Each slave has a corresponding bit in this array. A slave's diagnostic status address equals Start Address + Station
Address of the slave. For example, if the configuration status bits are mapped to %I00001, the status for the slave at Station Address 5 would be found at %I00001 + 5=%I00006.
 
 
 
Connecting the Module to the PROFIBUS Network
The module contains a standard female DB9 connector, labeled “PROFIBUS,” that can be connected to a PROFIBUS busterminal that complies with EN 50170.
IC693CHS398J GE Slot Docking Station programmable digital module 0
 
IC693CHS398J
5 SLOT EXPANSION
EMI ENHANCED
IND.CONT.EQ.FOR HAZ.LOC.
CLASS 1 DIV.2 GROUPS ABCD
Ambient 60C
 EEx nA IIC T5 X
0C<Ta<60C  GE FANUC
 Made in Charlottesville Va USA
 
Condition:
 
 
A brand-new, unused, unopened, undamaged item in its original packaging (where
packaging is applicable). Packaging should be the same as what is found in a
retail store, unless the item is handmade or was packaged by the manufacturer
in non-retail packaging, such as an unprinted box or plastic bag. See the
seller's listing for full details.
 
 
Terms:
 
We ships worldwide and accepts T/T and Paypal.
All items are subject to availability and passing our QA testing and
inspection.
Turnaround Time:
 
Standard order processing is 1-2 business days plus shipping method chosen.
Rush and off-hours service available for an additional fee.
 
Packaging and Handling:
 
Items are safely packaged in custom shipping cartons for protection.
 
Shipping:
 
We ship worldwide use UPS,FedEx, DHL or Truck Freight when meeded.
Call to use a shipping service other than the ones listed.
International Customers are responsible for all Customs fees, VAT and other
fees applied by their respective countries.
 
All shipments are fully insured.
 

Our advantage Products:

【Yaskawa】Servo Drive / Servo Motor

【Mitsubishi】Servo Drive / Servo Motor

【Honeywell】Module DCS / PLC

【Emerson】DeltaV Module / Servo Motor

【ABB】Input Output Module

【AB】Module / Touch Screen

【Rosemount】Pressure and Temperature Transmitter

【Yokogawa】Pressure Transmitter

【GE】IC69 Series PLC/ Fanuc Servo Motor and Drive

(Modicon,SMC,SICK,NORGREN,Siemens etc.)

Linture Technology Co,. Ltd
Contact person: Vivian
E-mail: linture0319@163.com
Cellphone: +0086-18026552038
Wechat:18026552038
WhatsApp:+86 18026552038
Tag:electric servo drive,
ac servo drive,
ac servo pack

Contact Details
LINTURE  Technology CO.,LTD 

Contact Person: Miss. Iris

Tel: 86-17728602038

Send your inquiry directly to us